2018 Honda Accord Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter #1
Hello,

I am getting a custom set up of hard piping made. The shop that has done all of my work to my accord is willing to make them for us if there is interest.

I know there was a group buy not too long ago and they went fast. I am bringing my car next week to start seeing what is needed so they can start the process.

I will keep you posted and will get picks soon as they are done.
 

·
Registered
Joined
·
153 Posts
Hello,

I am getting a custom set up of hard piping made. The shop that has done all of my work to my accord is willing to make them for us if there is interest.

I know there was a group buy not too long ago and they went fast. I am bringing my car next week to start seeing what is needed so they can start the process.

I will keep you posted and will get picks soon as they are done.
ME ME ME...I want some...yeah buddy!

4687
 

·
Registered
Joined
·
6 Posts
So how is it coming with the hard piping group buy? Who would we contact for that and I wonder if they would ship to Hawaii ? Thanks
 

·
Registered
Joined
·
32 Posts
Discussion Starter #5
As soon it's completed I will reach out. check-in for updates. Anyone who replies to this post will have an opportunity for a group buy.
 

·
Registered
Joined
·
32 Posts
Discussion Starter #9
Hello,

Just got finished this weekend along with an intake pipe similar to PRL's. I am in the process of testing now I will post some pictures soon but keep in mind this is not the finished product.

Also just installed a Type R Turbo.
 
  • Like
Reactions: azrael69

·
Registered
Joined
·
32 Posts
Discussion Starter #10
So here are some pictures as promised. This will not be the final fit and finish. Once we are done testing it.

I will release the final pictures and pricing. I'm glad some shops are willing to put the time in to help our needs for the 2018 and up Accord.

I have also added another test piece. They are working on for the accord intake pipe that fits on the accord stock TD03 turbo. PRL has one but it's for the type r set up. Not all of us have the Mod just yet.
 

Attachments

·
Registered
Joined
·
65 Posts
Looking good!
 
  • Like
Reactions: azrael69

·
Registered
Joined
·
754 Posts
So here are some pictures as promised. This will not be the final fit and finish. Once we are done testing it.

I will release the final pictures and pricing. I'm glad some shops are willing to put the time in to help our needs for the 2018 and up Accord.

I have also added another test piece. They are working on for the accord intake pipe that fits on the accord stock TD03 turbo. PRL has one but it's for the type r set up. Not all of us have the Mod just yet.

Just My .55 Cents ~ Comment on Your Project :
As Pictures are Placed - I'll call those 1, 2, 3, 4 . I Realize these are Not Final Pcs . an I Applaud Work that has been done .. NICE Stuff ..
Picture 1 . From what I see , it looks to be Open 105 degree and U May be Headed toward 125 Degree Open .
Picture 2. May need to Turn Up a Tad Sooner to Afford straighter Connect to Pipe 1 @ 125 Degree Open .
Picture 3. Fully Welded Pie Cuts and Tweak , I Found 10" Cut Saw "Blade Width" to be Ideal for Tweaks Mind U - it has to be Ground ( Sharpened ) for Cutting Alu. . .
I Cut 3/4 Way through - then Collapse that Blade Kerf - Tack for Fitting , next Cut maybe 2/3 Through slightly Different Clocking , Collapse that & Tack - to - Tweak Up for FIT .
Picture 4. Looks Good , Don't see Hard Pipe coming up to Throttle-body ? Are Going Stock there : ie ( Hose & Throttle Body Adapter Pipe )
As that STOCK Throttle-body Adapter Pipe - seems to Me to be - Weak ~ High Flow Area .. ? ( Choke Point )

Which is Only Reason 2 Years ago I wanted the Fire Wall Battery Bracket or - Rear Battery Relocation Kit ..
If You Plan to Tackle Throttle Body Adapter Pipe ..

I Realize that has a slight Taper Requires some Planning do to Sensors etc. , seeing Type R Honda Factory Placed an Alu. Pc. & Plastic on Accord Part ..

My Input there is the Speed of Air , If Current Motor is say 350 Cfm ~ 375 CFM stock , 400 Cfm Tuned , 440 Cfm with R Turbo -
Air Speed Needs to be Looked @ as it Probably Moving Up from approx . 185 MPH ~ to ~ 220_240 Mph .. which is in Itself ~ Creating Heat & Friction . .

Love this Stuff ~ Can't wait to see what You Guys come up with .. .
 

·
Registered
Joined
·
754 Posts
Oh and Picture 2 : I Like the Blue Marking , If it was My Ride - I'd Go that way If at all Possible ..
Even If it Meant an Entire _ Different Casting or Billet Pc. coming Off Inter_cooler & Up at 75 Degree Back 20 Degree Off - IC -
Reinforced Bumper etc. - for an - All Out Set Up .. ( Off Road Disclaimer ) . .
 

·
Registered
Joined
·
32 Posts
Discussion Starter #15
Hello all,
A number of you have inquired about the intercooler piping I currently have on my X Gen 2.0 Accord. In further discussions with Pro E-Shift, they have agreed to produce them for us. To make this happen the requirement will be as follows:
A 20 person group buy which will give you a special price of $600. After that, it will be $699. Once we have 20 people on the list will move forward with a 50% deposit. You can contact them directly to process your payment.
Direct message me I will keep a track of the first 20 people to sign up. I will post the list once it's full.
This will include all piping and couplers and brackets needed for the install.
You will need to remove your resonator box as this will be the space for the piping.
The factory piping at the intake will remain. I have not seen any reason to remove it, this will also keep the cost down.

Pictures were previously posted, minor tweaks will happen as this was a prototype set.
 
  • Like
Reactions: azrael69
1 - 15 of 15 Posts
Top