2018 Honda Accord Forum banner

Front camber plates question

6K views 10 replies 4 participants last post by  True_North_Accord 
#1 ·
For those who camber plates up front how does one adjust camber once it is assembled? There is barely any room to make adjustments after I installed Tein Flex Z coilovers
5873
 
See less See more
1
#9 · (Edited)
On the front the pic I posted above that black knob you turn it clockwise to make it stiffer and counterclockwise to make the ride softer with each click with up to 16 ways of adjusting. The rear it’s pita because you have to take off the wheel to make the adjustments. But I just set it to the recommend settings with 8 clicks counter clockwise from the stiffest setting on the rears, and 7 clicks on the front from the stiffest setting.

Edit: forgot to mention Tein also has electronic damping force controller (EDFC) that you can install on top of the adjustable dampers, which you can control from the inside of your vehicle. Kind of wish I spent the few extra bucks to get these installed tbh

 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top