2018 Honda Accord Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
25 Posts
Really interested how they do at the track. I am considering putting some on 17s i have laying around for track use.

What mods are you running?
 

·
Registered
Joined
·
25 Posts
Discussion Starter · #3 ·
Really interested how they do at the track. I am considering putting some on 17s i have laying around for track use.

What mods are you running?
Just phearable stage 3. Going to do more in the near future. Taking it to the track Sunday with the RPF1s and doing some weight reduction so we’ll see how it does. You’ll need hubcentric rings to have the RPF1s fit the accord hubs
 

·
Registered
Joined
·
25 Posts
Discussion Starter · #5 ·
What size are these new wheels and tires?
18x8.5 +40 RPF1. 245/40/18 tires. Had to use hubcentric rings to properly fit the RPF1s but that was a really easy part.
Just took it to the drag strip btw and it hooked with zero slippage on phearable stage 3 tune only mod. No burnout needed either.
 

·
Registered
Joined
·
25 Posts
Discussion Starter · #7 ·
How'd you do at the drag strip?
Best of 13.37 best 60’ was 2.01 best RT was .041 (ayyeee). Best mph was 104. Car kept pulling timing as Kcon went up to 0.63-0.65 but then remained consistent after I put in 100 octane unleaded (yea I know it doesn’t make it faster but it got my Kcon to stop rising). Car is phearable stage 3. TC turned off. And the drag wheels set up. Muffler and bigger resonator delete as well which I just did so it sounds better and people actually try to race me on the street lmao. Going to go back same set up but starting with 100 octane in the tank in hopes Kcon stays 0.49.
OH and no front seat. No spare tire. Saved 63lbs by switching to the RPF1s. Total weight savings was 184lbs with front seat. Spare tire. Muffler and resonator deleted. RPF1s.
 
1 - 7 of 7 Posts
Top