2018 Honda Accord Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
I have a 2021 Accord Touring 2.0T 10 speed auto with Phearable Stage 3 tune. I have stock 6 speed upper mount and a Hasport 62A lower mount. I've put about 2k miles since lower mount install. The vibrations are still high. Will Hasport 62A upper mount lower vibrations or is this just the nature of the beast? Once moving, the vibes go away, but I figured they would settle down.
 

·
Registered
Joined
·
19 Posts
I have a 2021 Accord Touring 2.0T 10 speed auto with Phearable Stage 3 tune. I have stock 6 speed upper mount and a Hasport 62A lower mount. I've put about 2k miles since lower mount install. The vibrations are still high. Will Hasport 62A upper mount lower vibrations or is this just the nature of the beast? Once moving, the vibes go away, but I figured they would settle down.
Have you removed the rubber strut bolt covers underneath the hood? Seemed to be the source of most of the vibrations in my x gen
 

·
Registered
Joined
·
16 Posts
Discussion Starter · #5 ·
Have you removed the rubber strut bolt covers underneath the hood? Seemed to be the source of most of the vibrations in my x gen
Nope. Not yet.
Have you removed the rubber strut bolt covers underneath the hood? Seemed to be the source of most of the vibrations in my x gen
Have you removed the rubber strut bolt covers underneath the hood? Seemed to be the source of most of the vibrations in my x gen
can you please share a pic of what to be removed..
 

·
Registered
Joined
·
19 Posts
Nope. Not yet.



can you please share a pic of what to be removed..
Directions in the link below

 

·
Registered
Lunar Silver 2019 Honda Accord Sport 2.0T 10AT
Joined
·
341 Posts
You shouldn't get crazy vibrations. I would make sure they are torqued to the correct spec. I ran Hasport 62A top and bottom on my 2019 2.0T and after 500 miles is was fine for vibrations. Engine noise is more pronounced but that was expected. I was also FBO Phearable Stage 3 & 4 when I went to flex fuel.
 
  • Like
Reactions: Samuelx

·
Registered
2019 2.0 EXL
Joined
·
520 Posts
You shouldn't get crazy vibrations. I would make sure they are torqued to the correct spec. I ran Hasport 62A top and bottom on my 2019 2.0T and after 500 miles is was fine for vibrations. Engine noise is more pronounced but that was expected. I was also FBO Phearable Stage 3 & 4 when I went to flex fuel.
Do you know if Hasport torque specs are the same as OEM Honda? Thx. I'm planning on having them check it next time I go in.
 

·
Registered
Lunar Silver 2019 Honda Accord Sport 2.0T 10AT
Joined
·
341 Posts
Do you know if Hasport torque specs are the same as OEM Honda? Thx. I'm planning on having them check it next time I go in.
Same Torque specs as factory.
 
  • Like
Reactions: Samuelx
1 - 14 of 14 Posts
Top