2018 Honda Accord Forum banner

1 - 16 of 16 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
I am just over 700 miles on my Commuter Accord and The vehicle is growing on me the more I drive it.

That being said I always felt that any major underbody work before the first oil change is way too soon.

Well, $20 on eBay for these what did I have to lose?

They have thick 3M tape, had to thoroughly clean dirt from factory tips, once they are Installed they sit flushed IN and have a perfect fit.

Thumbs up product.

((I completely feel as if I “Riced” out))

Anyways, so far all I can say is that they have put a big smile on my face.
 

Attachments

·
Registered
Joined
·
169 Posts
Kinda gives it a AMG-esque style from the rear. I don't think it's overly rice...Most will think it's the stock look.
 

·
Super Moderator
Joined
·
879 Posts
I am just over 700 miles on my Commuter Accord and The vehicle is growing on me the more I drive it.

That being said I always felt that any major underbody work before the first oil change is way too soon.

Well, $20 on eBay for these what did I have to lose?

They have thick 3M tape, had to thoroughly clean dirt from factory tips, once they are Installed they sit flushed IN and have a perfect fit.

Thumbs up product.

((I completely feel as if I “Riced” out))

Anyways, so far all I can say is that they have put a big smile on my face.
Nice mod!!! You got a link for them on Ebay?
 

·
Super Moderator
Joined
·
879 Posts

·
Super Moderator
Joined
·
879 Posts
Those little bars may obstruct the air flow too, for a few tenths hp. :devil:
Oh no... we wouldn't want to do that. :grin:
 

·
Registered
Joined
·
16 Posts
Those little bars may obstruct the air flow too, for a few tenths hp. :devil:
This thread does the same to my PC. 1/3 of the posts contain a big ass picture of a stock black accord. :grin:


To the OP, I am not really a fan of that mod to the exhaust tips, but I definitely wouldn't say it is ricer. The average person would think it came that way I would bet.
 

·
Registered
Joined
·
557 Posts
To Each Their - Own :

OK , Maybe He'll Report Better Mpg do to Back Pressure .. LOL __ It's looks OK

I did see some Items : Carbon Fiber so on E-Bay everything was placed on Vehicle with 3M Tape ....

24V Please Check My Other 205 Post - for all those May Need - English , Spelling , Pictures , and Credit Adjustments . . . do to Lack of Experience ..
 

·
Registered
Joined
·
27 Posts
Discussion Starter #14 (Edited)
I am happy to report back from the battlefield that these have had a week of success... :p
I have gotten compliments and Last night I had an encounter w' an Accord XGen owner whom I noticed from affar at the Mall lot as we were leaving the evening movie.
He had a 2.0T Touring, Kept Staring in awe at the Back. He Said he Most "Delightfuly preffered my placement of the Badges as it kept a Linear clean continuous Line"----""Well THANK YOU Dear Sir"".
**((Initially he seemed irritated because he thought his salesman did NOT gave him every option, he is ordering the tips too.))


P.S

And if I may, and you guys would like to see my scratchpad.....! Here is what I eventually Envision for the Accord, this is a bit of photoshop done by me, (Exhaust/Roof/Wheels)
And the Drawing is ALL me (My Car w' Civic TypeR cut outs enlarged and additionally drawn on lines, No Fog lights (Awful) and the Vossen CV3 Wheels.

Enjoy.
 

Attachments

·
Registered
Joined
·
557 Posts
Anyone Messing with ?

Anyone Modding Exhaust system Rear Exhaust , so Lifting , Tugging , Moving those Rear Mufflers any Guess Aprox Weight of those Units

I was just Looking at some Titanium - Thinking of picking up some Welding Equipment . . Cups and all that Stuff ..

Would be Nice If Guys ~ Threw Down ~ Measurements If You all get Chance . .

If Bola SS came out with Back Section for Saving Weight - maybe We should write them to see If anything is in the Works . . :smile:
 
1 - 16 of 16 Posts
Top