2018 Honda Accord Forum banner
1 - 4 of 4 Posts

· Registered
64 Posts
Discussion Starter · #1 · (Edited)
I have tried a lot of things. Socks, foam under, etc...

I cut 2 stripes of 6 inches of this foam. I used a cedar shim to push one on each side between the glass and board, between the brake light and the side. It fit very thightly. Since then i can set the bass at maximum. No more rattle. I am really happy. I think that the board was ratteling against the backglass.


1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.