2018 Honda Accord Forum banner

Installed 25mm BORA wheel adapters.

3145 Views 4 Replies 3 Participants Last post by  MyKey 2.0T
5
Thinking alittle outside the Honda box I went with BORA wheel adapters for their reliability and credibility with large trucks, suv’s and Jeep’s. I chose 1” adapters for 2003-2008 Honda Pilot. It has the same bolt pattern, hub size and lug thread except lugs are 1 1/2” long compared to stock 1”. Due to the longer stud I also needed to get all new lug nuts. I chose McGard M12x1.5x 1.5”

For some reason, I don’t know if all 10th Gen accords are the same or because my car is 2021 Touring the front studs were 1 1/16” long causing interference with the wheel. The rear studs were 15/16” which was perfect for the 1” adapter. I shaved about 1/8” off each front stud before installing the adapters.

BEFORE
5390
5391


AFTER
5392
5393
5394
See less See more
  • Like
Reactions: 2
1 - 1 of 5 Posts
Thinking alittle outside the Honda box I went with BORA wheel adapters for their reliability and credibility with large trucks, suv’s and Jeep’s. I chose 1” adapters for 2003-2008 Honda Pilot. It has the same bolt pattern, hub size and lug thread except lugs are 1 1/2” long compared to stock 1”. Due to the longer stud I also needed to get all new lug nuts. I chose McGard M12x1.5x 1.5”

For some reason, I don’t know if all 10th Gen accords are the same or because my car is 2021 Touring the front studs were 1 1/16” long causing interference with the wheel. The rear studs were 15/16” which was perfect for the 1” adapter. I shaved about 1/8” off each front stud before installing the adapters.

BEFORE View attachment 5390 View attachment 5391

AFTER
View attachment 5392 View attachment 5393 View attachment 5394
How does it drive with spacers? Do you notice a positive difference in performance? Thanks.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top