2018 Honda Accord Forum banner

LX to Sport exhaust finisher

3460 Views 4 Replies 5 Participants Last post by  Howard Klein
I can’t find anything on the web, or anything for that matter in regards to replacing the LX exhaust finisher with Sport ones. I know the angle of the LX exhaust is a more of a downward design and wondered if the chrome exhaust finisher of the sport would fit? Help?
1 - 5 of 5 Posts
Have you checked online to see if the models in question share the same part number for the muffler? If they do then I would think the finishers would be interchangeable. Here is a website you can find part numbers - Honda Parts Now
  • Like
Reactions: 1
I can’t find anything on the web, or anything for that matter in regards to replacing the LX exhaust finisher with Sport ones. I know the angle of the LX exhaust is a more of a downward design and wondered if the chrome exhaust finisher of the sport would fit? Help?
They'll for sure work and I just saw a set on ebay. Worst case you would cut the muffler tip a little. The stock sport ones are kinda pointed down and they don't fully enter the finisher
They'll for sure work and I just saw a set on ebay. Worst case you would cut the muffler tip a little. The stock sport ones are kinda pointed down and they don't fully enter the finisher
Can you share that set you saw on ebay? Even if it expired. I cant seem to find it. thanks.
I can’t find anything on the web, or anything for that matter in regards to replacing the LX exhaust finisher with Sport ones. I know the angle of the LX exhaust is a more of a downward design and wondered if the chrome exhaust finisher of the sport would fit? Help?
I can’t find anything on the web, or anything for that matter in regards to replacing the LX exhaust finisher with Sport ones. I know the angle of the LX exhaust is a more of a downward design and wondered if the chrome exhaust finisher of the sport would fit? Help?
I have a 2018 EX-L and have installed the sport exhaust finisher -Easy fit .The pipe will not sit in the Sport refinisher ,it stays as it is and is clear of any obstruction from the finisher .
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top