2018 Honda Accord Forum banner
1 - 10 of 10 Posts

·
Registered
2018 Honda Accord Sport 2.0T-10spd
Joined
·
48 Posts
Thinking of going to get one. Which do u guys prefer? Which makes more intake noise? Performance?
Price was the biggest thing for me, so I went with Mishimoto. It has a throaty, deep tone upon acceleration with a nice sp00ly woosh at the end. You can hear it in the cabin if you know what you're listening for but it's definitely noticeable with the windows down.

Performance wise I've read that intakes don't matter a whole lot so long as that they're a closed boxed system. If you're looking for gains and cooler AITs then an intercooler is a must followed by a tune.
 

·
Registered
2019 2.0 EXL
Joined
·
521 Posts
Mishimoto on sale for about $316 right now.

PRL offers 2 intake systems - high volume for about $400 and stage 1 for about $130. You can also get the stage 1 intake hose and air filter element separately if you want...
 

·
Registered
2018 Honda Accord Sport 2.0T-10spd
Joined
·
48 Posts
Mishimoto on sale for about $316 right now.

PRL offers 2 intake systems - high volume for about $400 and stage 1 for about $130. You can also get the stage 1 intake hose and air filter element separately if you want...
Surprisingly, I was able to get my Mishimoto off Amazon Prime for $287
 

·
Registered
Joined
·
1,004 Posts
I Read where 1 Honda Owner said - Skip It all - get K&N Only . .

Personally - still Feel Battery has to Go - be Gone - Relocation Kits with Wire & All ..

Then R Unit of even Better could be done ..( Just saying as it's such a Small Area ) seems to be Limiting Vendors . .
 

·
Registered
Joined
·
8 Posts
$186?! That's a steal, now go get the PRL Stage1 intake tube. It made my mishi louder
Yea I couldn't pass it up for that price! What is different with the PRL tube to make the intake noise louder?

EDIT: I just found PRL's website and on the product page it explains the difference between it and the stock tube. Thanks for the tip!
link if anyone is interested: 2018+ Accord 2.0T Silicone Intake Hose Kit
 

·
Registered
2018 Honda Accord Sport 2.0T-10spd
Joined
·
48 Posts
Yea I couldn't pass it up for that price! What is different with the PRL tube to make the intake noise louder?

EDIT: I just found PRL's website and on the product page it explains the difference between it and the stock tube. Thanks for the tip!
link if anyone is interested: 2018+ Accord 2.0T Silicone Intake Hose Kit
Just a heads up, you'll need to trim the hose to make it fit as it'll be too long with the Mishi

Follow the instructions in this video at the 20:06 time mark

 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top