2018 Honda Accord Forum banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
I just installed a torque solutions valve in my 2022 accord sport 1.5T(if was not fun!). I compared my diverted valve mount to the 1.5t civic. Ours is on the torbo housing where the civics is on the turbo inlet pipe. Both have the cut out for the air at 6:00 centered on the lower bolt hole. The torque solutions have has the slot between two bolt holes so not matter what way you turbo it, the slots don’t line up. Clearly the slot can’t up up at 1200 Breen not air will be vented. If I turn the valve one way to an the, only part of th slot will intersect. I was able to get it installed hit there is a fluttter. Take a look…

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.