Type R Door Sill Prototype

Nice... better be careful... Honda is going to view your build thread and all the other ideas and build an Accord Type R from the factory incorporating all of the things you are doing to your car. :smile_big:

At least you'll have the "original". Have you given any thought to making this an illuminated door sill? A red light under the parts you would decide to illuminate might be nice... just a thought.

Generally Moden _ Print Shops

Will Use 3 Layer Material - usually 2 Layered Colors , but 3 Layered Colors are also Common - then Depth Control ( Milling ) Is Color Selected By Depth ..
I Know as I had to set up Machine Like this for a Print Shop , Nice little X,Y - Ball Screws with Depth Control on of Basically High Speed - Router . This Machine being of an Older Design
some Years back - Set the Depth by Hand - Fine Threaded Mount . . Each Color was around .015-.020 Thick so plenty of Room ( All Mounted On Very Flat Surface ) . .
Could even do Buttons - Like White Button with Red Letters saying Nitrous . .

Abe Froman said:

This is currently a very rough idea and a little project that I've been kicking around. I'd like to do a stainless steel door sill cover specific to the 10th gen Accord that has been die-cut so the paint color shows through on the areas that have been removed. The red R would be achieved by placing some vinyl underneath the door sill. I would need to have these pieces cut with a waterjet...Anyone have access to CAD software?

Click to expand...

This is Basically ~

Basically what is looked like , only Step Back 30+ Years it was Cutting Edge . .

https://technabob.com/blog/2015/03/03/x-carve-3d-carving-machine/

Man, that looks awesome!

Thanks. I think I’m going to change it to an HFP door sill opposed to the Type R.

If you decide to produce those, let us know. Those are very nice!